11.1V 3S 6500mAh 75C Vant Lipo Li-Po Battery Hard Case with Deans T plug - 1103

This battery is the Grade A Li-Po battery which has little or almost no chance of getting swelling or puffing like many other batteries sold online.

As a premium quality battery, it will get you out of the trouble and danger caused by some low quality Li-Po Batteries.

This is a good upgrade battery if you are running a 1/10 or 1/8 Scale RC Cars. It has the capacity of 6500mAh and 75C maximum Discharge Rate which means it can constantly release at 480Amp. The capacity of 7600mAh will make your car running much longer time as well. 

Specification

• Battery Chemistry: Lithium Polymer
• Voltage: 11.1V
• Capacity: 6500mAh
• Discharge Rate(C): 75C
• Burst Discharge Rate(C): 150C
• Configuration: 3S1P
• Connector Type: Deans Plug
• Balancer Connector Type: JST-XH
• Length: 139mm
• Width: 47mm
• Height: 37mm
• Battery Weight (dev.10g): 436g/pc

Safety Notes

1. To ensure safety, please check and confirm LiPo battery surface and voltage is normal before using.

2. If the new LiPo battery won’t hold a full charge or loss the charge very quickly in short time, please use Professional lipo battery Charger to charge and recycle several times first.  For most LiPo battery, the safest charge rate is 1C - 2C.

3. Never Over-charge above 4.2V per cell and Over-discharge below 3.2V per cell. (Normal cell voltage is between 3.7V~4.2V)

4. Never charge LiPo battery unattended.

5. If you are not using the battery for a while, please plug the battery off the car and leave it at the storage charge voltage which is 3.85v for each cell.