Toyota FJ45 1:12 Scale Pickup Truck
FMS Toyota FJ45 Electric RTR RC Pickup Truck
FMS recreate the legendary Toyota FJ45, officially under license from Toyota. The hinges of the vehicle are all movable - The tailgate & doors can be opened, the windshield can be folded forward, and the roof removed, along with the doors.
To create this officially licensed RC version of the TOYOTA FJ45, FMS super-finely restores the real car, and the degree of restoration is no less than that of the static model.
The hood hinge is the same living hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, and the battery is also here, for easy installation. The doors on both sides can be opened, the front windshield can be folded forward, if the roof is removed at the same time, it can be transformed into a convertible shape. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild performance. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.
The two-speed gearbox provides powerful torque. Metal gears carry power, with bearings all over the whole vehicle, allow it moving forward slowly even if it is fully loaded with gravel.
The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of taillights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.
- Ready To Run Model
- Two Speed Transmission
- Ball Bearings Full Set
- Polystyrene Body
- Nice Painted Body
- Hood Can Be Opened
- Both Side Doors Can Be Opened
- Tailgate Can Be Opened
- Super Exquisite Interior
- Steel C-Channel Frame
- Leaf Spring Suspension
- Remote Control Lighting System
- 180 Motor
Functioning main front lights, turn signal & rear lights. The headlights are able to be turned on in low or high beam mode.
Toyota Officially Licensed
An authentic scale replication of a classic Toyota pickup truck
Injection-Moulded Hard Body
The car uses an injection moulded hard body shell for increased durability
Two Speed Transmission
The two-speed gearbox provides powerful torque. Not only does the FJ45 have the quality of a scale display model, it also has all the features of a top of the line rock crawler! A two-speed gearbox provides powerful torque with metal gears & full ball bearings installed. Allowing it to move along low-traction surfaces with a heavy load in the rear tray.
The roof and both doors can be removed, the front windshield can be folded forward
Spacious Rear Tray
The tailgate can be opened and the rear tray is very wide, and can cope with different loads by increasing or decreasing the number of leaf springs
Remote Control Lighting System
Light has functions with light control plug-ins including headlights, turn signals, brake lights and reverse lights. The vehicle also includes a LED light set with headlight, taillight, turn signal & rear lights. The headlights are able to be turned on in low or high beam mode.
LEAF SPRING SUSPENSION
Steel plate spring shock structure creates better climbing performance.
STEEL C-CHANNEL FRAME
Solid frame chassis ensures 1:12 FJ45 is easy to conquer all kinds of complex terrain
- Length: 345mm (13.5in)
- Width: 127mm (5in)
- Height: 124mm (4.81in)
- Wheelbase: 270mm (10.6in)
- Ground Clearance: 29mm (1.14in)
- Weight: 601g (1.325lbs)
- Approach/Departure Angle: 58° / 29.9°
- Tyres: Ø60x15mm (Ø2.36x0.59in)
- Max Speed: 8km/h Approx.
- Run Time: 20 Minutes Approx.
|Ready to Run
|Max LiPo Power:
|Max LiPo power:
- 1 x 1:12 TOYOTA FJ45 RTR
- 1 x 2.4G Transmitter
- 1 x 2-in-1 Receiver (installed)
- 1 x 180 Brushed Motor (installed)
- 1 x 9g Plastic Digital Servo (installed)
- 1 x 2S 7.4V 380mAh Battery
- 1 x USB Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
- 4 x AAA Batteries for Transmitter