Tamiya 1/10 CC-02 1990 Land Rover 90 RC Defender - 58700

Overview

This is a Limited-Edition Radio Control kit of the 1990 Land Rover Defender 90. Unlike item 58700, this version includes a pre-painted body in light blue!

The Defender 90 is a legendary Land Rover off-road car, and its roots go back to 1948. Based on differences in wheelbases, this car has three types – the Defender 90/110/130. This R/C model depicts a 3-door model with 93-inch wheelbase.

CC-02 Chassis is designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with black wheels and grippy block pattern tyes.

Description

Build a scale recreation of one of Britain's most recognisable four-wheel-drive vehicles with the Tamiya 1990 Land Rover Defender 90. This 1/10-scale RC assembly kit combines the Defender's classic three-door body with Tamiya's rugged CC-02 ladder-frame chassis for realistic trail driving, general off-road use and scale display.

The clear polycarbonate body captures the Defender 90's upright profile and short-wheelbase proportions, while separate moulded components recreate the front grille, mirrors, light housings, spare-wheel cover and distinctive outer roll cage. Front and rear light housings are also designed to accept separately available 5mm LEDs.

Underneath, the CC-02 uses a longitudinally mounted 540 brushed motor, separate gearbox and transfer case, propeller shafts and front and rear solid axles. Four-link suspension and CVA oil-filled dampers provide controlled axle movement over uneven terrain, while the differential gears can be locked during assembly for additional traction on loose or low-grip surfaces.

Features

• 1/10 scale R/C model assembly kit. Length: 429mm, width: 200mm, height: 215mm, wheelbase (short): 242mm (CC-01S chassis).
• Polycarbonate body un-painted.
• Compatible with 5mm-diameter LEDs x 2 for headlights and 5mm-diameter LEDs x6 for the rear.
• Includes separately molded parts for grille, side mirrors, light cases and outer roll gages.
• Black ABS resin wheels are paired with semi-pneumatic all-terrain rubber tires.
• The ladder frame CC-02 chassis features superior durability and employs front/rear coil spring suspension which is
• Great for off-road surfaces including rocky terrain.
• Includes 540 Type brushed motor
• A wide range of Hop-Up Option Parts is available to customize the CC-02 chassis.

Specifications

• Adjustable Gear Ratio: Yes
• Bearings: Plastic Bushing
• Body Material: Polycarbonate Pre-Painted Body
• Body Stickers: Included
• Chassis Material: FRP Fiberglass Reinforced Plastic
• Chassis Type: CC-02
• Construction Type: Assembly Kit
• Differential Type: Gear
• Drive Type: 4WD
• Motor: 540-Brushed Type
• Scale: 1/10
• Shock Damper: CVA Oil Filled
• Suspension: 4-link
• Terrain Use: Multi-Purpose

Needed to Complete:

• 2-Channel Radio Transmitter (FlySky FlySky FS-GT2 2.4Ghz 2ch Radio w/ Receiver $69)
• Steering servo (13 or 20Kg Metal geared servo $39-$45)
• Electronic Speed Control (Hobbywing Quicrun 1060 60A Waterproof Brushed ESC $59 or Surpass 60A Waterproof Crawler Brushed ESC - SUR 79677 $49)
  
• 7.2-7.4volt battery pack (Tornado or similar 7.2V NiMh $39 7.4 LiPo $59)
• Compatible charger (From $35 on wards)

Specifications: 

• Scale: 1/10 
• Length: 429mm 
• Width: 200mm 
• Height: 215mm 
• Wheelbase: 242mm (Short)

Includes:

• (1) Tamiya 1990 Land Rover Defender 90 1/10 4WD Scale Kit