Skip to content
Welcome to Technohobbies
Welcome to Technohobbies

SK-100158-04 | SkyRC Q200 Quad Port AC/DC Smart Charger

Sold out

SK-100158-04 | SkyRC Q200 Quad Port AC/DC Smart Charger

SkyRC Q200 is a Quad-channel charger with 4 independent circuits, which can charge four different kinds of batteries simultaneously. The charger adopts a 480×320 color LCD display, and paired channels (A&C or B&D) support power distribution in AC mode. Moreover, users could either connect it to PC or mobile device to further expand their using experience. Firmware upgrade is available via PC software interface.


A very unique feature of Q200 is SCAN TO GO (automatically charging system). As the range of battery types and capacity becomes more and more, each battery requires its own dedicated charging process. It is easy to set up the charger incorrectly for a specific type of battery, resulting damage the battery or even cause accident.

The revolutionary SCAN TO GO provides a solution to this problem by allowing the user to assign a QR Code which contains all the relevant data for the battery for charging or discharging. The user can create a unique QR Code by using “SkyCharger” apps. Print it and paste it on the battery.

Using your smart phone and launch “SkyCharger” app. Since all the essential information is stored in the QR Code. All you need to do is press the Scan button, and the charge or discharge process will start automatically.

Power Distribution

Q200 supports power distribution in AC mode. For example, Channel B is 79W, then Channel D will be 21W, but total power will remain 100W. Channel A and C works the same way.

LiHV Mode Available

Q200 is capable of charging / discharging the new generation of Lithium battery whose maximum voltage is 4.35V.

Voltage Calibration

During the manufacturing process every Q200 production unit gets tested and calibrated after highest factory standards. Ambitious users who trust their own expensive equipment more or who prefer their personal fluke to serve as reference have the possibility to adjust the Q200 factory calibration by a few counts.

The Bluetooth 4.0 connectivity allows the user to remote control and monitor the Q200 comfortably through an app on a portable device such as smartphone, iPad, or iPhone. The iOS app can be downloaded from iTunes Store, the Android app from Google Play Store. Operation of the app is self-explanatory and the same on iOS and on Android. Explicit pairing is not required; after download and installation just activate Bluetooth on your mobile device and launch the app. Q200 and your device will establish Bluetooth connection automatically.

  • Net Weight: 1335g
  • Input Voltage: AC100-240V / DC 11-18V
  • Charge Circuit Power DC Input: CH A/CH B: 100W CH C/CH D: 50W
  • AC Input: CH A+CH C=100W CH B+CH D=100W;
  • CH A/CH B: 50-100W CH C/CH D: 0-50W
  • Discharge Circuit Power: 4 x 10W
  • Charger Current Range: CH A/CH B 0.1-10A & CH C/CH D 0.1-5A
  • Discharge Current Range: 0.1-2A x 4
  • Current Drian for Balancing Port Max: 200mA/cell
  • Trickle Charging Current: 50mA-300mA & OFF
  • LiPo/LiFe/Lilon/LiHV Battery Cell Count: 1-6S
  • NiMH/NiCd Battery Cell Count: 1-15S
  • Pb Battery Voltage: 2-20V
Included items:  
  • Q200 Smart Charger
  • 4x External XH Balance Boards
  • 4x XT60 Charging Leads
  • 2x Bare Wire Charging Leads - Please note - these are what we solder onto if you select a different battery connector when adding to cart.
  • AC Power Cable
  • User Manual


The SkyRC Q200 smart charger is the ultimate quad port charging solution.


Charge up to 4 batteries simultaneously up to 5A per channel (10A for channel A/B) And never charge your LiPos on the wrong setting again with SkyRC's innovative 'Scan to Go' feature which interfaces. The Q200 includes built-in Bluetooth to allow the charger to connect with your phone and use your smartphone's built-in camera to scan a pre-printed barcode on your LiPo batteries, to ensure you charge with the correct settings, every time.