AXI03005T2 | Axial 1/10 RBX10 Ryft 4WD Electric Brushless Off-Road RTR RC Rock Racer - Black
All New Axial 1/10 RBX10 Ryft 4WD Electric Brushless Off-Road RTR RC Rock Racer AXI03005T
Axial® introduces another first with the 1/10 scale RBX10™ Ryft™ 4WD. This ready-to-run vehicle lets any RC driver experience the thrills of rock bouncer off-road action. Full-size rock bouncers refuse to stop — or even back down on the throttle — when facing steep climbs and massive rocks. So does the RBX10™ Ryft™ 4WD. This ground-up new Axial® vehicle handles lots of abuse and loads of power!
The RBX10™ Ryft™ 4WD’s robust, custom tube chassis is engineered from a high-strength composite plastic that withstands the hard knocks of RC off-roading — even while moving at the high speeds produced by a strong powertrain featuring a 4S-capable, 2200Kv brushless motor. Both the front and rear axles boast a rugged two-piece, solid axle design. Licensed Interco TSL Bogger tyres on Raceline wheels, aided by long travel front and rear shocks, do their part to tame wild off-road tracks. These features, along with a full-time 4WD transmission, make the RBX10™ Ryft™ a fun vehicle to send over the trails at full throttle.
Exclusive Spektrum™ technologies, such as Smart telemetry and AVC® traction control, help even new RC drivers enjoy unstoppable performance from the RBX10™ Ryft™ 4WD. Its Spektrum™ DX3™ radio uses DSMR® technology for superior range, response, and interference resistance. The radio is also fully compatible with the Smart telemetry potential of the vehicle’s Spektrum™ Firma™ 130A Smart ESC. When using a Spektrum™ Smart LiPo battery, you’ll stay aware of on-board battery capacity with only a glance at the transmitter's handy voltage level indicator. The Smart Firma ESC is also compatible with 2S to 4S Smart LiPo batteries which ensure you stay up to date with your current battery life that will show on your DX3's voltage level indicator. If your battery is getting too low an alarm will sound to indicate a changeover is required soon.
The DX3™ radio and SR6100AT receiver also support the on-demand traction control of Spektrum™ AVC® (Active Vehicle Control®) technology — included here for the first time in an Axial® RTR vehicle. With an AVC® system, you can dial in extra stability as needed to carve corners or nail jumps without backing off the power. You have full-throttle freedom over rough terrain, slick surfaces and loose dirt!
The Axial® RBX10™ Ryft™ 4WD is ideal for beginner to intermediate RC enthusiasts who are interested in rock and ultra4 racing or crawling, over trails, dirt, gravel, rocks and more. It’s available with a striking orange or black factory-applied finish and requires nothing except a battery and charger.
The Spektrum™ Firma™ 2200Kv motor delivers massive horsepower and torque to drive the Ryft™ up the steepest hills and launch up and over big ledges. Supporting 3S and 4S and paired with the Firma™ ESC, this motor really packs a punch and can be custom-tuned to driver preference.
The feature-packed, waterproof Firma™ 130A Smart ESC delivers power and intelligence all-in-one — no additional vehicle modules or links required. Compatible with 2S to 4S LiPo or 5-12C NiMH input, this brushless ESC gives your RBX10™ Ryft™ the ultimate drive while feeding important telemetry data straight to your DX3™ transmitter in real time.
The front and rear axles feature realistic metal differential housing covers in a raw, unfinished appearance.
The Axial® RBX10™ Ryft™ uses the fastest, most widely recognized tube chassis in RC off-roading. Its proven, high-strength composite plastic is engineered to withstand the hard knocks of rock racing.
Boggers feature a directional tread pattern with the patented Interco TSL (three stage lug) design and simulated custom siping for performance! Boggers are the go-to tyre for professional off-roaders who want an aggressive, off-road tyre that performs as good as it looks.
Raceline is by far the most popular rim for extreme off-road duty. Their ability to stand up to the abuse demanded by the full-size racer and their show quality finish is second to none. The officially licensed Raceline Monster gives the Ryft™ that authentic racing look and provides the strength to handle whatever you can dish out!
The RBX10™ Ryft™ 4WD is engineered to carry a lot of power over punishing off-road tracks — as evidenced by the durable two-piece, moulded plastic, solid-axle design of its front and rear axles. The front, centre and rear differentials are the same, keeping things simple and easy when performing maintenance or repairs.
The oil-filled shocks are hard anodized, threaded bodies, with a single coil-over spring, plus an aluminium shock cap and pre-load adjustment for tuning your suspension. The shocks are tunable for achieving the best dampening rate. The 12mm bore size also creates more fluid volume for better performance.
Larger diameter WB11 Wildboar™ CVD driveshafts are necessary on this truck due to the extreme power delivered by the 2200Kv brushless motor.
Hardened steel Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.
The included Spektrum™ DX3™ radio features exclusive DSMR® technology for superior range, response, and interference resistance. It’s also fully compatible with the Smart telemetry potential of the vehicle’s installed Spektrum™ Firma™ 130A Smart ESC. Use a Spektrum™ Smart LiPo battery, and you can follow its capacity at a glance on the DX3 transmitter's voltage level indicator. When the battery level gets low, an alarm will sound.
The Spektrum S614S metal-geared servo offers 201 oz-in of steering torque, a metal case for strength, and it’s waterproof* for extra protection against the elements. For extra protection, the R&D team made sure to test and specify a servo saver durable enough to handle the punishment a rock bouncer with this much power can dish out. The three metal spring bands are fully enclosed with strong nylon plastic housing.
- Solid axles front and rear with universal axle joints
- Robust tube chassis design
- Strong powertrain with 4S-capable brushless motor
- Licensed Raceline wheels and Interco TSL (Three Stage Lug) Bogger tyres
- Ready to Run completion level requires no assembly, and comes with everything required other than a battery and charger
- Approximate Assembly Time: No assembly required
- Ball Bearings: Full set
- Battery: Sold Separately
- Battery Input Lead: IC5
- Body: Screen printed with applied decals
- Brakes: Integral with ESC
- Bushing Material: Metal
- Charger: Sold Separately
- Chassis: Injection moulded plastic
- Completion Level: Ready-To-Run
- Differential: Bevel gear
- Drivetrain: 4WD
- Drive Type: Forward/Brake/Reverse
- Power Type: Electric
- Gear Pitch: 32-pitch
- Motor Size: 3660, 2200Kv
- Motor Type: Brushless - Sensorless
- Pinion: 17T
- Radio: Included
- Receiver: Included
- Scale: 1/10
- Servos: Included
- Shock Type: Oil-filled, Front 130mm (5.11"), Rear 145mm (5.70")
- Speed Control: Included
- Spur Gear: 53T
- Suspension: Solid axle 4-link
- Technology: AVC
- Vehicle Type: Rock Racer
- Water-Resistant: Yes
- Product Height: 222mm (8.75")
- Product Length: 546mm (21.5")
- Product Weight: 3.29kg (7.26lbs)
- Product Width: 324mm (12.75")
- Wheelbase: 387.35mm (15.25")
- Front Track: 323.8mm (12.75")
- Rear Track: 323.8mm (12.75")
- Ground Clearance: 82.5mm (3.25")
- Tyre Tread: Interco TSL Bogger
- Tyre Type: Off-road
- Rim Colour: Black
- Rim Type: Raceline Monster
- Rim Width: 40.64mm (1.6")
- 3S or 4S LiPo battery & compatible charger
|Assembly Type:||Ready to Run|
|Max LiPo Power:||4S (14.8v)|
|Power Source:||Electric Brushless|
|Chassis Type:||Rock Racer|
|On/Off Road:||Off Road|
|Max LiPo power:||4S (14.8v)|
|Pinion gear:||17T 32DP|