Skip to content
Welcome to Technohobbies
Welcome to Technohobbies
Arrows Hobby Prodigy RTF RC Glider with Vector Stabilisation

Arrows Hobby Prodigy RTF RC Glider with Vector Stabilisation

by technohobbies.com.au
$299.00

Arrows Hobby Prodigy RTF RC Glider with Vector Stabilisation system

AH022R-VEC

A tough, quick to assemble R/C trainer that's easy to fly and ideal for both the newcomer and anyone looking for a gentle aerobatic sportster

The 1400mm Prodigy features quick assembly and stable flight control. A great choice for novice pilots and also fun for experienced pilots.

As an aspiring R/C pilot it’s important that your first aeroplane ticks a number of crucial boxes. In the first instance you need it to be easy to fly and forgiving of basic errors, but you also want it to be tough, able to withstand some punishment and totally reliable. In addition, a good flight duration, a basic aerobatic ability, speedy assembly, convenient transport, and easy storage will be high on your list. In short, a 'beginner friendly' aeroplane is what you're looking for and the Arrows Prodigy is the perfect choice.

Supplied 100% factory-assembled, the Prodigy’s cleanly moulded EPO airframe is both strong and light, while the rear-mounted motor protects the power system from heavy landings. Offering superb low-speed handling characteristics and a benign stall, this is an aeroplane that's been designed to look after you, give you time to react, and learn at a comfortable pace. Mind you, it’s got some power too and will comfortably outperform many trainers in the aerobatic department, making it a truly enjoyable all-round sportster.

Technically advanced, the Prodigy incorporates the Arrows Vector three mode stabilisation system and comes ready to fly with everything included in the box, save four AA batteries for the transmitter. The fact is, for first time flyers the Arrows Prodigy ticks all those crucial boxes, plus a few you hadn’t even considered.

Key Features

  • Factory assembled and practically ready to fly straight from the box.
  • Light and impact resistant EPO airframe.
  • Brushless 3S power system.
  • Gentle glider-like flying characteristics (perfect for learning).
  • Rear mounted motor offers protection from heavy landings.
  • Excellent flight duration.
  • Easy to store and transport.
  • Superb low-speed handling.
  • Proven pre-installed hardware.
  • Superior ball joint control linkages.
  • Secure magnet-retained canopy.
  • Retract-free, fly anywhere simplicity.
  • Four pre-installed high-quality 9g digital servos.
  • Supplied with Arrows' AR06 6-channel radio system.
  • 30-minute assembly time.
  • 10 minute duration on the supplied 3S 1300mAh LiPo.
  • Power configuration: 2212-kv1500 motor, 20A ESC 11.1V 1300mAh-2200mAh 25C battery.
  • Standard 4-channel configuration: throttle, elevator, rudder, aileron.
  • Simple, lightweight, and easy to transport design.
  • Pusher propeller design facilitates FPV usage.
  • Up to 15 minutes flight time (when using the recommended battery).
  • Robust and durable EPO foam material.
  • One-piece horizontal stabilizer.

Included in the box

  • 1x Factory assembled and finished 2-piece fuselage.
  • 1x Factory assembled and finished 2-piece wing.
  • 1x Factory assembled and finished 1-piece tailplane.
  • 1x Pre-installed 2212 1500KV brushless motor.
  • 1x Pre-installed 20A ESC with XT60 connector.
  • 1x Pre-installed Vector switchable 3-mode gyro.
  • 4x Pre-installed high quality 9g servos.
  • 1x Main wing spar / joiner.
  • 1x AR06 6-channel, 2.4GHz full range Tx / Rx combo.
  • 1x 3S 11.1V 1300mAh 25C LiPo battery.
  • 1x 3S mains Li-Po charger.
  • 1x Comprehensive instruction manual.

The 1400mm Prodigy features quick assembly and stable flight control. A great choice for novice pilots, and also fun for experienced pilots.

Built with ultralight tough EPO foam, the large wing area and high-winged airframe configuration gives the Prodigy low wing-loading and extraordinary amounts of lift, even at slow speeds.

Unless the aircraft lands upside down, it is almost impossible to damage the pusher propeller. The pusher propeller design also facilitates FPV setups.

Quick-release and quick-install design enables the airplane to get flying in the sky in minutes upon unpacking with a fully charged battery.

In terms of the power configuration, the high-performance 2212-KV1500 brushless motor, 20A ESC, and 3S 1300mAh-2200mAh 25C battery can burst out enough power for soaring slowly or accelerating into the sky. It is worth mentioning that the flight time can be as long as 15 minutes in the case of gliding flight with a 2200mAh battery.

Prodigy has a standard 4-channel configuration with throttle, elevator, rudder, and aileron control surfaces.

Give the 1400mm Prodigy an opportunity to bring out the prodigy in you.

Needed to Complete

  • 4x AA batteries for the transmitter.
  • Product Description

Specifications

  • Shipping Weight 0.00kg 0.00lbs
  • Product Length 1,089mm 42.9in
  • Product Wingspan 1,400mm 55in
  • Product Wing Area 25dm2 387in2
  • Completion Level RTF
  • Experience Level Beginner
  • Assembly Time 30min
  • Recommended Usage Environment Outdoors
  • Material EPO
Wing Area 25dm²(387.3sq.in)
Wing Loading 38g/dm²(0.08oz/in²)
Wingspan 1400mm (55in)
Length 1089mm (42.9in)
CG (Center of Gravity) 70-80mm from leading edge
Power System Brushless 2212-kv1500
Electronic Speed Control 20A (XT60)
Servos 9g servo x 4
Landing Gear None
Required Battery 11.1V 1300mAh-2200mAh 25C
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps No
Lights No
Material EPO Foam
Gyro Vector