G.T. Power X4 Pro Quad Port AC/DC Smart Charger - GT-X4 |
GT-X4 | G.T. Power Pro Quad AC/DC Smart Charger
Overview
The GT Power x4 Quattro is a Quad-channel charger with 4 independent circuits, which can charge four different kinds of batteries simultaneously. The charger features an LCD display, and paired channels (A&C or B&D) support power distribution in AC mode.
- Four independent 100W charging circuits — charge 4 batteries simultaneously
- Supports NiMH, NiCd, LiPo and Pb battery chemistries
- Up to 15-cell NiMH/NiCd or 6S LiPo per channel
- Lithium cell voltage monitoring with per-cell balancing
- Dual AC/DC input power (100–240V AC or 11–18V DC)
Description
The G.T. Power Pro Quad Charger consists of four multi-chemistry capable rapid chargers/dischargers & cell balancers with built-in microprocessors. With four individual charging circuits, you can charge four batteries at once, regardless of battery chemistry or cell count. Allowing up to 100 Watts per circuit, the Pro Quad Charger can charge or discharge up to 15 cells of NiMH or NiCd batteries and up to 6S LiPo batteries per channel. It also features lithium cell voltage monitoring to balance individual cells within a LiPo battery during charging or discharging.
The G.T. Power X4 Pro Quad charger is a simple yet powerful quad output (4x 100W) dual input multifunctional charger with built in LiPo balancing (JST-XH) for up to 6S Lithium batteries.
It features 4 individual charging circuits allowing you to charge 4 batteries simultaneously regardless of battery type and cell count.
It is packed with features that exceeds many higher cost units.
Primarily designed for Lithium Polymer (LiPo, Li-Poly) batteries, it can also charge Li-Ion, Li-Fe (A123M1), Li-HV Ni-Cd, Ni-MH, and Pb (lead acid) batteries.
Features
GT-X4 Quattro 4 output charger AC/DC (240/12V)
- Capacity Limit
- Maximum safety
- Temperature monitoring
- Input power monitoring
- Easy to program buttons
- 5 battery memory
- Individual cell monitoring
- 2-Line Back lit LCD display
- Built in Balancer to 6S packs
- Cycle charging/discharging
- Includes "FAST" & "STORAGE" Li-xx programs
- Small Footprint
Long balance and charge leads (270 and 300mm respectively) - Charge current: 0.1-7.0A
- Circuit power: 100W for charging max (X4), 5W for discharging (X4)
- Discharge current drain for LiPo: 300mah
- Supports: Lithium cells 1-6s, NiCd/NiMh 1-15 cells, PB voltage 2-20V
- Cables: 2 x XT60 charge leads, 2 x Deans charge cables, 4 x long balance cables with XH balance boards.
- Adaptor leads: Dean to JST, Dean to Tamiya, Dean to Futaba female, Dean to alligator, XT60 to alligator.
Charge modes: Fast/Balance/Storage/Discharge.
Specifications
| Charger | |
|---|---|
| Compatible With: | LiPo, Li-Ion, NiMH, NiCd, Pb |
| Output Connector Type: | Deans, Tamiya, JST, Futaba, Alligator Clips (EC5 or Traxxas optional on request at $15 a cable) |
| Type: | Smart |
| Maximum Amps: | 7 |
Included Items
- 1x Pro Quad AC/DC Smart Charger
- 4x Balance Boards
- 4x Balance Board Cables
- 2x Deans Plugs
- 2x XT60 Plugs
- 1x Tamiya Plug
- 1x JST Plug
- 1x Receiver Plug
- 2x Alligator Clips